Siam PE39VPEMT Inverter Rotary Compressor
Siam PE39VPEMT Rotary Compressor: What the R-407C Fields Say, the Coefficient Nobody Printed, and an Empty Official Page
Key facts at a glance
| Field | Value | Where it comes from |
|---|---|---|
| Model | PE39VPEMT | product page |
| Refrigerant | R-407C | product page, printed twice |
| Cooling capacity | 22738 Btu/h | product page |
| Input power | 2150 W | product page |
| Supply | 220 to 240 V, 50 Hz, single phase | product page |
| Cooling capacity in watts | 6664 W | computed from the Btu figure |
| Coefficient of performance | 3.10 | computed from the two printed fields |
| Nominal tonnage | 1.9 ton | computed from the Btu figure |
| Displacement | not printed anywhere in reach | none |
| Test condition for the rating | not printed | none |
The gap between the first five rows and the last two is the whole story of this string. A buyer can size it and quote it from the printed fields. A buyer cannot reproduce the rating without knowing what bench produced it, and nobody publishes that for this model.
What the page prints, field by field
The product page carries a numbered summary and a detail table, and the two agree with each other. That agreement is worth something: many pages in this catalogue carry a summary line that the detail table contradicts.
| Row | Value as printed |
|---|---|
| Model | PE39VPEMT |
| Refrigerant Gas | R-407C |
| Input | 2150 W |
| Capacity | 22738 Btu |
| Voltage | 220-240 V, 50 Hz, 1 phase |
| Usage / Application | AC, drier, refrigeration, chiller, etc. |
| Type | Electric |
| Colour | Black |
Two observations about this table. First, the refrigerant is stated twice, in the summary block and in the detail table, both times as R-407C. There is no second gas offered anywhere on the page, which makes the model unambiguous on that point. Second, the application list is a category phrase rather than a qualification: it names five uses without ranking them, and the trailing "etc" means the list is illustrative, not exhaustive. It should not be read as a claim that this model is equally suited to all five.
The page also does not print a displacement, a mass, a sound level, an oil charge, a connection size, or a test condition. Those six absences are treated as open items later.
The arithmetic that closes
Two printed fields and one conversion are enough to produce a third figure, and in this case the arithmetic behaves.
| Step | Operation | Result |
|---|---|---|
| Capacity in watts | 22738 divided by 3.412 | 6664 W |
| Coefficient of performance | 6664 divided by 2150 | 3.10 |
| Nominal tonnage | 22738 divided by 12000 | 1.9 ton |
The coefficient is a derived number, not a printed one, and it should be labelled as such in any quotation that uses it. What makes it worth quoting anyway is that it lands where a single-rotary air-conditioning compressor of this size is expected to land. A ratio built from two fields that came from different benches would usually show up as an implausible figure; 3.10 does not. That is weak evidence of coherence, not proof of a single test condition, and the difference matters if the figure is going into a tender.
The tonnage deserves the same caution. 1.9 ton is what the Btu figure converts to, and trade practice would call this a two-ton class machine. Rounding it up in a specification would overstate the model by about five per cent against its own printed capacity.
Is it an inverter compressor?
The string is often described as an inverter model, and that description needs testing rather than repeating.
What the sources in reach establish: the product page prints no drive field at all, no inverter designation, no frequency range beyond the fixed 50 Hz supply, and no speed. The second channel's page for the smaller sibling prints the same shape of field set, again with a fixed 50 Hz supply and no drive designation. Neither page says the word inverter.
What the other side has: a distributor listing for a different model in the same family, PE33VPEMT, describes that model as a DC inverter unit, and the store's page for PE33TGMH uses the word inverter in its own text. So an inverter designation does exist inside the PE family.
The honest conclusion is that inverter status is a family-level possibility and not a documented property of this string. The suffix letters would be the place to settle it, and they are not decoded: the family in this catalogue carries VS, VN, VT and VP in the same position, four patterns, with no document in reach that assigns meanings to any of them. A buyer who needs an inverter drive should ask for the drive type in writing rather than infer it from the model string.
The PE family it belongs to
The catalogue groups 87 Siam rotary items across eleven pages, and the wider rotary compressor category places the series beside the GMCC, Highly and Mitsubishi rotary lines. Four items in the Siam group are close enough to this model to matter when someone is looking for a substitute.
| Model | Refrigerant | Capacity | Relation to this model |
|---|---|---|---|
| PE39VPEMT | R-407C | 22738 Btu/h | this model |
| PE36VTKMT | not printed on its page | not printed | one size down, different suffix |
| PE31VSEMT | R-407C | 5777 W | two sizes down, capacity printed in watts |
| PE31VNEMT | not printed on its page | not printed | same 31 code, different suffix pattern |
| TNB306FXQMC-L | not printed on its page | not printed | different prefix family entirely |
The table is deliberately thin, because the sources are thin. Two of the four rows have no refrigerant and no capacity on their pages at all, and filling those gaps from the target model's figures would be exactly the error this desk avoids.
One structural point does survive: the family is numbered in the thirties, and the numbers run 31, 33, 36 and 39 in the models whose strings are visible in this catalogue. That looks like a size ladder, and the two rows with printed capacities sit in the expected order.
What the 31 and 39 actually prove
With two capacities printed, the size ladder can be tested rather than assumed.
PE31VSEMT prints 5777 W. This model converts to 6664 W. The step between them is 15.4 per cent more cooling capacity for two steps of code. If the code were a direct capacity index, dividing capacity by the code would give a constant, and it does not: 5777 divided by 31 gives 186.4 W per code unit, while 6664 divided by 39 gives 170.9 W per code unit. The two ratios differ by 9.1 per cent.
That is enough to say what the code is not. It is not a linear capacity index, and it is not a displacement in cubic centimetres, because no source in reach prints a displacement for either model. What it probably is, a nominal size class with stepped capacity, remains a reading rather than a finding, and it is presented as such.
Where the sources disagree or fall short
Four defects are worth recording, because each one changes how a buyer should use the page.
The manufacturer's page for the R-407C rotary range returns a placeholder. It resolves, it is titled as a series page, and its body reads "COOMIMG SOON" with the word coming misspelled. A buyer looking for an engineering table from the manufacturer will not find one there today. The manufacturer's rotary product section is still the right starting point for the range, but the R-407C series page itself carries no data.
The second channel files a rotary product under a scroll heading. The page for PE31VSEMT is titled Siam Rotary Compressor and sits in the Siam Scroll Compressor collection at the same time. The title is right and the collection is wrong; a buyer browsing the scroll collection should not conclude that this family is a scroll line.
Phase descriptions vary across the family in third-party listings. This model's own page prints single phase, 220 to 240 V. A distributor listing for a sibling PE model describes that sibling as three phase. Both can be true of different builds in one family, and neither should be carried across to this string.
Nothing anywhere states the test condition for the 22738 Btu/h figure. The coefficient derived above is therefore a ratio between two printed numbers, not a certified performance claim.
How to write the purchase order
Pin the full string: PE39VPEMT. The family carries at least four suffix patterns in the same position, and the catalogue lists each as a separate item.
Pin the gas: R-407C, which the page prints twice. Because R-407C is a blend, the charge and top-up procedure has to respect that, and the working section below explains why that matters for a service contract.
Pin the supply: single phase, 220 to 240 V, 50 Hz. Ask explicitly whether an inverter drive is required, because the page does not settle it.
Then obtain the five fields the page does not print: displacement, oil charge, sound level, connection sizes and mass. Add a sixth: the test condition behind the capacity figure, if the figure is going into a design calculation rather than a quotation.
Finally, keep the units straight. Quote the capacity as 22738 Btu/h and, if a watt figure is wanted, as 6664 W computed from it. Do not mix the two in one line without saying which is printed and which is converted.
Standards and approvals that frame the purchase
Two parts of the household appliance series apply, and they answer different questions. The component question is answered by IEC 60335-2-34, the part written for motor-compressors, which covers the compressor as a component. The appliance question is answered by IEC 60335-2-40, the part written for electrical heat pumps, air conditioners and dehumidifiers, whose scope covers refrigerant groups A1, A2L, A2 and A3 as defined by ISO 817.
The refrigerant is designated under ANSI/ASHRAE Standard 34, whose designation system treats R-407C as a zeotropic blend rather than a single compound. That single fact drives the service advice in the next section.
The commercial frame comes from public work on cooling demand. The IEA's work on cooling records that air conditioners and electric fans already account for nearly a fifth of the electricity used in buildings worldwide. A model of this capacity sits squarely in that demand, which is why the efficiency figure, even a derived one, is worth more attention than the tonnage label.
Working with R-407C rather than against it
R-407C is a blend of three components, and a blend does not behave like a single fluid during a charging operation. If a system is charged from a cylinder as a liquid and the cylinder is partly empty, the components can leave in a different proportion from the one they entered with. The practical consequence is that a top-up which ignores this can leave a system with a refrigerant whose composition no longer matches the one the compressor was rated on, and therefore a capacity that no longer matches the printed figure.
This is not a reason to avoid the model. It is a reason to write the service procedure down. Charge as liquid, keep the cylinder upright, do not vapour-charge from a partly used cylinder, and record the charge mass. A rotary compressor rated at 22738 Btu/h on R-407C will deliver that figure only while the charge is the charge it was rated with.
The second consequence is commercial. Because the blend question is a service question rather than a purchasing question, it belongs in the enquiry as a request for the charging instructions, not as a request for a different refrigerant.
Frequently asked questions
What capacity does PE39VPEMT have?
22738 Btu/h as printed on the product page, which converts to 6664 W. The page does not state the test condition behind the figure.
What is its coefficient of performance?
About 3.10, computed from the printed capacity and the printed 2150 W input. It is a derived figure, not a published rating.
Which refrigerant does it use, and is that a blend?
R-407C, printed twice on the product page. It is a zeotropic blend of three components, so it must be charged as a liquid and topped up with care.
Is PE39VPEMT an inverter compressor?
Not established by any document in reach. The page prints a fixed 50 Hz supply and no drive field. Inverter descriptions exist elsewhere in the PE family, so it is a family possibility, not a documented property of this string.
What supply does it need?
Single phase, 220 to 240 V, 50 Hz, as printed. Some sibling models in the family are described as three phase by third-party listings, so the supply should always be confirmed against the order.
Can I substitute PE31VSEMT?
Only if you need less capacity. It prints 5777 W against this model's 6664 W, a step of about 15.4 per cent, and the suffix pattern differs. No published source states that the two are interchangeable.
Why can I not find a manufacturer data sheet?
The manufacturer's page for the R-407C rotary range currently returns a placeholder rather than a table. That is a fact about the page today, not a claim that no document exists anywhere.
What should I ask the supplier for?
Six items: displacement, oil charge, sound level, connection sizes, mass, and the test condition behind the capacity figure. None of them is printed on any page reviewed for this article.
Where can I compare the rest of the family?
The Siam rotary compressor category lists the 87 items in this group across eleven pages, and the news index carries release notes for the site's own product pages.
Sources
| Source | Document | Use in this article |
|---|---|---|
| S475 | qishanrcompressor.com product page for Siam Rotary Compressor PE39VPEMT, summary block and detail table | model, R-407C, 22738 Btu/h, 2150 W, 220 to 240 V 50 Hz single phase, application phrase |
| S476 | qishanrcompressor.com Siam rotary compressor category page, 87 items, 11 pages | the family listing and the four sibling strings used in the comparison table |
| S477 | qishanr.com product page for Siam Rotary Compressor PE31VSEMT | the 5777 W capacity used in the ladder test, and the scroll-collection misplacement |
| S478 | technic.siamcompressor.com, R-407C rotary series page and rotary product section | the placeholder finding and the manufacturer's range structure |
| S479 | made-in-china.com distributor listing for PE33VPEMT | the inverter description attached to a sibling model, used as family-level evidence only |
| S480 | IEC 60335-2-34:2024 and IEC 60335-2-40:2024, IEC webstore | the component and appliance safety scope, the refrigerant grouping clause |
| S481 | ANSI/ASHRAE Standard 34 designation tables, ASHRAE | R-407C as a zeotropic blend rather than a single compound |
| S482 | IEA, The Future of Cooling | the share of building electricity taken by air conditioning |
SIAM ANB100FZSMT Inverter Compressor
Related Article