Mitsubishi LHT53VBAC Rotary Compressor
Mitsubishi LHT53VBAC Rotary Compressor: Three Seller Listings, One Refrigerant Disagreement, and No Published Datasheet
| Field | What is documented | Source grade |
|---|---|---|
| Model string | LHT53VBAC, sold under that exact string | distributor listings, and this site |
| Machine type | hermetic rotary compressor | distributor specification table |
| Refrigerant | R22 on two distributor listings, R410A in this site's sales prose | conflicting, see below |
| Supply | single phase, 220 to 240 V, 50 Hz | distributor specification table |
| Capacity | 32000 Btu/h, quoted by one informal source | weakest claim in this article |
| Nominal tonnage | 2.5 ton, same source, and does not close against its own Btu figure | weakest claim |
| Nominal power | 3.5 hp, same source | weakest claim |
| Displacement | not published in any accessible document | none |
| Mitsubishi datasheet | not located for this string | none |
The pattern is the reverse of a catalogue model. Here the machine is real and on sale, but the only structured specification table in reach is a distributor's, and the manufacturer publishes nothing this desk could retrieve for this exact string.
What this article can and cannot establish
Mitsubishi Electric publishes a compressor product section, and it is linked below, but it does not expose a per-model table for a legacy R22 rotary of this size. A search of the manufacturer's own product pages does not surface LHT53VBAC. That is stated plainly rather than papered over, because the difference between a documented figure and a repeated one matters when a buyer is sizing a replacement.
Three independent commercial sources do carry the string:
- this site's own product page for LHT53VBAC, which is live and carries descriptive prose but no specification table;
- a distributor listing with a five-line specification table, which is the only structured table found;
- an informal technical blog entry that supplies the capacity, tonnage and horsepower figures that circulate with this model.
Two of the three agree on the electrical side. They disagree on the refrigerant. The capacity figures come from a single source and are internally loose, which is why they are handled separately in a section of their own.
The three sources side by side
| Field | This site | Distributor listing | Informal blog |
|---|---|---|---|
| Model string | LHT53VBAC | LHT53VBAC | LHT53VBAC |
| Type | hermetic rotary, sales description | Rotary Compressor | rotary compressor |
| Series | not stated | LHT series | not stated |
| Refrigerant | R410A, in descriptive prose | R22 | not stated |
| Phase | not stated | 1 phase | not stated |
| Voltage | not stated | 220 to 240 V | 220 V |
| Frequency | not stated | 50 Hz | 50 Hz |
| Capacity | not stated | not stated | 32000 Btu/h |
| Tonnage | not stated | not stated | 2.5 ton |
| Power | not stated | not stated | 3.5 hp |
| Drive | not stated | not stated | fixed frequency |
The distributor's table is the only one with field names and values aligned, and it is therefore the backbone of everything below. The site's page contributes availability and the fact that the item is stocked; it contributes no number, which is the honest way to read a sales description.
The refrigerant disagreement, and how to settle it
This site's page states that the model is optimized for R410A. The distributor listing states R22 in a field named Refrigerant. Both cannot be right, and the difference is not cosmetic: the two fluids run at different pressures, use different oils, and are not interchangeable in a system.
Three reasons point to R22, and one points the other way. Against R410A: the distributor table is the only source that fills a refrigerant field at all, and it says R22; the capacity figure that circulates with this model, 32000 Btu/h at 220 V, is a legacy comfort-cooling size rather than a modern high-pressure R410A size; and the same catalogue carries eight Mitsubishi rotary items in this model family, several with the older letter patterns, which is a legacy-line signature rather than a current one. For R410A: this site's prose, which is the only place the string R410A appears anywhere in the sources reviewed.
Sales prose on a product page is written once and reused across a category. When it contradicts a structured specification field, the structured field wins, and the prose is recorded as a defect. That is the position this article takes: R22 is the working value, R410A is flagged, and the nameplate decides. A buyer replacing a compressor should photograph the nameplate gas charge before ordering, because an R22 system cannot take an R410A compressor and the reverse is equally true.
Reading the string: LH, LHT and the 53
The string has three readable parts and one part that no accessible document decodes.
| Part | What can be said | Evidence |
|---|---|---|
| LH | family prefix in this site's catalogue | eight items in the category use LH or LHT prefixes |
| T | appears in the distributor's series field, LHT | distributor listing |
| 53 | nominal size class, shared by LH53 and LHT53 items in this site's catalogue | two separate items, same 53, different prefix |
| VBAC | supply and build code, not decoded here | no document in reach defines these letters |
The 53 is worth pausing on, because it is the one part that can be tested. This site's catalogue lists both LH53VBAC and LHT53VBAC as separate purchasable items, with separate pages. Two strings, one size class, one letter apart. Whatever the T denotes, it does not change the 53, and it does not make the two items interchangeable. A purchase order that says 53, or that says LH53 when the requirement is LHT53, is ambiguous.
The suffix letters are left undecoded on purpose. Across the six Mitsubishi strings examined in this site's catalogue the suffixes run VBAC, VBDC, VBGC and YBAC, and no document in reach assigns meanings to the V, B, A, C or Y positions. Guessing them would be the easiest way to produce a confident wrong answer.
What the circulating capacity figures actually support
The figures 32000 Btu/h, 2.5 ton and 3.5 hp travel together, and they do not agree with each other. The arithmetic is worth doing once, because it tells a buyer how much precision the source deserves.
32000 divided by 12000 gives 2.67 tons. The same source says 2.5 ton, which is 30000 Btu/h at the same conversion, so the two published figures differ by about 6 per cent. 32000 divided by 3.412 gives 9378 W, which is the cooling capacity expressed in the unit this desk quotes in quotations. 32000 divided by 3.5 gives 9143 Btu/h per nominal horsepower, a ratio that sits in the normal band for a single-phase rotary of this size but is not a published performance figure.
The conclusion is not that the numbers are wrong. It is that they are rounded to trade sizes: 2.5 ton and 3.5 hp are how the model is sold, not what a test bench printed. A quotation should carry the Btu figure, and a design calculation should not be built on the tonnage.
There is a second caution. All three sources place this model at 50 Hz. Capacity in a rotary scales with speed, so a 60 Hz build of any rotary of similar displacement delivers more than its 50 Hz rating. Nothing in the sources reviewed gives a 60 Hz rating for this string, and the 32000 Btu figure should not be carried into a 60 Hz application without a written rating.
The family this model sits in
This site's catalogue groups the model with seven other Mitsubishi rotary items on the first page of a 44-page category. They matter to a buyer because substitution is the usual reason someone searches a model string.
| Item | Prefix and size class | Relation to this model |
|---|---|---|
| LH53VBAC | LH, 53 | same size class, one letter shorter |
| LH53VBDC-S | LH, 53 | same size class, different suffix |
| LH48VBAC-S | LH, 48 | smaller size class |
| LH48VBGC-S | LH, 48 | smaller size class, different suffix |
| LH48YBAC-S | LH, 48 | smaller size class, Y suffix |
| LH45YBAC-S | LH, 45 | smaller again |
| LH45VBDC-S | LH, 45 | smaller again, different suffix |
| TS33VDEC-S | TS | different family entirely |
The table is a warning, not a substitution chart. Eight strings, four suffix patterns and three size classes, with no published cross-reference between any of them. A buyer who needs a drop-in replacement has to match the nameplate, and the closest string in the catalogue is not evidence of interchangeability.
Where this site's own page falls short
The page for this model is live and it is the page the button at the foot of this article points to, so its weaknesses are worth stating rather than hiding.
It carries no specification table. Every sentence on it is category-level prose that would read the same for any rotary compressor: quiet operation, durable housing, compact design, thermal protection. None of those claims is a measurement, and none of them carries a number.
It states R410A, which the only structured table in reach contradicts. That is the single most consequential defect on the page, because a buyer who reads only this site will order against the wrong gas.
It does not state the supply. A 220 to 240 V single-phase 50 Hz machine and a 60 Hz machine are different products with different capacities, and the page leaves the distinction open.
What the page does establish is availability: the item is listed, priced for inquiry, and grouped in the Mitsubishi rotary category. That is a real and useful fact, and it is the one this article relies on it for.
How to write the purchase order
Pin the string first, in full, including the T: LHT53VBAC. The catalogue also lists LH53VBAC, and the two are separate items.
Pin the gas second, in writing. The distributor table says R22, this site's prose says R410A, and the nameplate is the only authority. Ask the supplier to confirm the gas against the nameplate, and put the confirmed value on the order.
Pin the supply third: single phase, 220 to 240 V, 50 Hz. If the application is 60 Hz, say so and ask for a rating rather than assuming the 50 Hz capacity carries over.
Then state what nobody has published. There is no accessible Mitsubishi datasheet for this string, so displacement, oil charge, sound level, connection sizes and mass are all open. Those five items belong on the enquiry, not on the assumption.
Finally, treat the tonnage as a trade label. Quote the Btu figure in the specification, and keep 2.5 ton and 3.5 hp as commercial shorthand with the source named.
If the required frame is smaller than this one, the catalogue lists LH48VBAC-S in the 48 class, and it lists LH45YBAC-S two steps down. The wider rotary compressor category on the same site places this whole family beside the other rotary lines, and a buyer who needs a scroll machine rather than a rotary should start from the Mitsubishi scroll line, which the same catalogue covers separately.
Standards and approvals that frame the purchase
Two parts of the same household appliance series apply, and they answer different questions. The component question is answered by IEC 60335-2-34, the part written for motor-compressors, which covers the compressor as a component. The appliance question is answered by IEC 60335-2-40, the part written for electrical heat pumps, air conditioners and dehumidifiers, whose scope states that it does not take into account refrigerants other than group A1, A2L, A2 and A3 as defined by ISO 817.
The refrigerant itself is designated under ANSI/ASHRAE Standard 34, whose designation system gives R-22 as a single-compound refrigerant rather than a blend. That distinction is practical rather than academic: a single compound can be charged and topped up without the fractionation concern that applies to a zeotropic blend, and that is one of the reasons legacy comfort-cooling equipment of this vintage is still in service. The safety classification for the fluid, and the charge limits that follow from it, belong on the enquiry; nothing in the sources reviewed for this article states either for this model.
The commercial frame is set out in public work on cooling demand. The IEA's study of the subject records that air conditioners and electric fans already account for nearly a fifth of the electricity used in buildings worldwide, and that the average efficiency of units sold today is less than half of what is typically available. A legacy R22 rotary is on the wrong side of that comparison, which is why the efficiency question, not the availability question, is what usually decides whether a machine of this generation is repaired or replaced.
Frequently asked questions
Is LHT53VBAC a current Mitsubishi model?
No document reviewed for this article shows it as a current catalogue item. It is offered by distributors and by this site, which is evidence of commercial availability rather than of current manufacture.
Which refrigerant does it use?
R22 according to the only structured specification table found; R410A according to this site's sales prose. The two conflict, the structured field is the stronger evidence, and the nameplate should be checked before ordering.
What is the capacity?
32000 Btu/h is the figure that circulates, and it comes from one informal source. It converts to about 9378 W. It is not a published Mitsubishi rating and should be confirmed in writing.
Is it 2.5 ton or 2.67 ton?
Both appear: the source states 2.5 ton, while 32000 Btu/h divided by 12000 gives 2.67. The tonnage is a rounded trade label; the Btu figure is the one to quote.
What does the 53 mean?
It is a nominal size class shared by two different strings in this site's catalogue, LH53VBAC and LHT53VBAC. It is not a published displacement, and no document in reach converts it to one.
What supply does it need?
Single phase, 220 to 240 V, 50 Hz, on both sources that state the electrical side at all. No 60 Hz rating was found.
Can I substitute LH53VBAC?
Only against the nameplate. The two are separate catalogue items, one letter apart, with no published cross-reference and no published equivalence.
What documentation should I ask for?
A nameplate photograph, a written refrigerant confirmation, and a capacity rating at the actual supply frequency. Displacement, oil charge, sound level, connection sizes and mass are published nowhere in reach and must come from the supplier.
Where can I compare the alternatives?
The Mitsubishi rotary compressor category on this site lists the rest of the family, and the site's news index carries release notes for its own product pages.
Sources
| Source | Document | Use in this article |
|---|---|---|
| S468 | qishanrcompressor.com product page for Mitsubishi Rotary Compressor LHT53VBAC, and the Mitubishi rotary compressor category page | availability, the R410A sales claim, the eight-item family grouping, the sibling strings |
| S469 | okmarts.com distributor listing for Mitsubishi Compressor LHT53VBAC, specification table | type, series, R22, single phase, 220 to 240 V, 50 Hz |
| S470 | mbsm.pro technical blog entry for LHT53VBAC | the 32000 Btu/h, 2.5 ton and 3.5 hp figures, fixed frequency, 220 V |
| S471 | Mitsubishi Electric compressor product section | the manufacturer's published product scope, used as negative evidence for this string |
| S472 | IEC 60335-2-34:2024 and IEC 60335-2-40:2024, IEC webstore | the component and appliance safety scope, the refrigerant grouping clause |
| S473 | ANSI/ASHRAE Standard 34 designation tables, ASHRAE | the designation of R-22 as a single-compound A1 fluid |
| S474 | IEA, The Future of Cooling | the building electricity share and the efficiency gap |
Mitsubishi PN25TACMT Rotary Compressor
Related Article